Electrolux 42 Panduan Pemasangan, Penggunaan & Perawatan - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan & Perawatan untuk Kap Ventilasi Electrolux 42. Electrolux 42 22 halaman. 30” and 36” free-standing range hood
Juga untuk Electrolux 42: Panduan Pemilik dan Petunjuk Pemasangan (45 halaman)
Halaman Cetak
Control buttons
16
Control buttons
This hood is equipped with an electronic motor and
lamp control.
The control is able to set 4 diferent fan speeds, turn
ON/OFF light and has a timer function.
In the following drawing are described the main key
functions.
1. Light Button
•
Press lamp button to turn ON the light (Lamp
state previously OFF).
•
Press lamp button to turn OFF the light (Lamp
state previously ON).
2. Timer Button
•
The default timer setting is 10 minutes, and it
can be adjusted between 20 minutes and
1 minute.
•
After pressing the timer button, the control
enters to a timer setup mode, and user can
adjust the timer countdown time with the
"
" and "
The timer can be initiated immediately
pressing the timer button, after setting the
timer duration or pressing the timer button
twice (default 10 minutes setting).
•
If no action occurs within 5 seconds, the
countdown will start.
•
During the timer setup the "
buttons are dedicated to the timer and no
motor action will occur.
•
Once the timer is initiated, it can be cancelled
by pressing the timer button again.
3. Display
•
Shows the hood settings.
4. "
" Button. Speed Decrease/OFF
•
This button is used to decrease the fan speed,
or turn OFF the fan.
•
The fan will turn OFF if the "
" buttons within 5 seconds.
" and "
" button is
•
If the fan is at second speed and the "
button is pressed, the fan will be set to first speed.
•
If the fan is at third speed and the "
pressed, the fan will be set to second speed.
•
If the fan is at fourth speed and the "
button is pressed, the fan will be set to third
speed.
•
If the fan is OFF and the "
pressed, the control backlight will light up.
5. "
" Button. Speed Increase/ON
•
This button is used to increase the fan speed,
or turn ON the fan.
•
The fan will turn ON if the "
pressed and the hood was OFF.
•
If the fan is at first speed and the "
is pressed, the fan will be set to second
speed.
•
If the fan is at second speed and the "
button is pressed, the fan will be set to third
speed.
•
If the fan is at third speed and the "
button is pressed, the fan will be set to fourth
speed.
•
If the fan is at fourth speed and the "
button is pressed, a beep will sound.
"
"
" key is
"
" button is
" button is
" button
"
"
"