Electrolux 42 Посібник з монтажу, експлуатації та догляду - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник з монтажу, експлуатації та догляду для Вентиляційна витяжка Electrolux 42. Electrolux 42 22 сторінки. 30” and 36” free-standing range hood
Також для Electrolux 42: Посібник користувача та інструкція з монтажу (45 сторінок)
Друкувати сторінку
Control buttons
16
Control buttons
This hood is equipped with an electronic motor and
lamp control.
The control is able to set 4 diferent fan speeds, turn
ON/OFF light and has a timer function.
In the following drawing are described the main key
functions.
1. Light Button
•
Press lamp button to turn ON the light (Lamp
state previously OFF).
•
Press lamp button to turn OFF the light (Lamp
state previously ON).
2. Timer Button
•
The default timer setting is 10 minutes, and it
can be adjusted between 20 minutes and
1 minute.
•
After pressing the timer button, the control
enters to a timer setup mode, and user can
adjust the timer countdown time with the
"
" and "
The timer can be initiated immediately
pressing the timer button, after setting the
timer duration or pressing the timer button
twice (default 10 minutes setting).
•
If no action occurs within 5 seconds, the
countdown will start.
•
During the timer setup the "
buttons are dedicated to the timer and no
motor action will occur.
•
Once the timer is initiated, it can be cancelled
by pressing the timer button again.
3. Display
•
Shows the hood settings.
4. "
" Button. Speed Decrease/OFF
•
This button is used to decrease the fan speed,
or turn OFF the fan.
•
The fan will turn OFF if the "
" buttons within 5 seconds.
" and "
" button is
•
If the fan is at second speed and the "
button is pressed, the fan will be set to first speed.
•
If the fan is at third speed and the "
pressed, the fan will be set to second speed.
•
If the fan is at fourth speed and the "
button is pressed, the fan will be set to third
speed.
•
If the fan is OFF and the "
pressed, the control backlight will light up.
5. "
" Button. Speed Increase/ON
•
This button is used to increase the fan speed,
or turn ON the fan.
•
The fan will turn ON if the "
pressed and the hood was OFF.
•
If the fan is at first speed and the "
is pressed, the fan will be set to second
speed.
•
If the fan is at second speed and the "
button is pressed, the fan will be set to third
speed.
•
If the fan is at third speed and the "
button is pressed, the fan will be set to fourth
speed.
•
If the fan is at fourth speed and the "
button is pressed, a beep will sound.
"
"
" key is
"
" button is
" button is
" button
"
"
"