Electrolux CH120 Buku Instruksi - Halaman 11

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Kap Ventilasi Electrolux CH120. Electrolux CH120 21 halaman. Chimney hood
Juga untuk Electrolux CH120: Buku Instruksi (20 halaman)

Halaman Cetak

Please ensure that when the appliance is

installed it is easily accessible to an

engineer in the event of a breakdown.

All installations must comply with the local

authorities requirements for the discharge of

exhaust air.

Incorrect installation may affect the safety of

this cooker hood.

Installation Requirements

Before installation check the wall to which the

cooker hood is to be fitted for electric cables,

water pipes or gas.

This cooker hood is designed to be fixed to

any vertical surface over a cooking area, and

can be used in the extraction (ducted to the

outside) or recirculation mode.

The installation work must be undertaken by a

qualified and competent person.

INSTALLING THE COOKER HOOD

The manufacturer disclaims any responsibility for

damage due to incorrect installation of the cooker

hood or if the hood is not installed in compliance with

relevant regulations controlling this type of

installation.

Unpacking

The cooker hood is supplied with the following

components for installation:

• Canopy (C), including controls, worktop

illumination and fan unit.

• U-shaped upper chimney section (S).

• U-shaped lower chimney section (I).

• Metal recirculation plate (T).

• 120mm ducting spigot (A).

Fixing kit comprising:

• Wall fixing brackets (1,2 and 3).

• Document pack.