Electrolux CH120 지침서 - 페이지 11

{카테고리_이름} Electrolux CH120에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux CH120 21 페이지. Chimney hood
Electrolux CH120에 대해서도 마찬가지입니다: 지침서 (20 페이지)

Please ensure that when the appliance is

installed it is easily accessible to an

engineer in the event of a breakdown.

All installations must comply with the local

authorities requirements for the discharge of

exhaust air.

Incorrect installation may affect the safety of

this cooker hood.

Before installation check the wall to which the

cooker hood is to be fitted for electric cables,

water pipes or gas.

This cooker hood is designed to be fixed to

any vertical surface over a cooking area, and

can be used in the extraction (ducted to the

outside) or recirculation mode.

The installation work must be undertaken by a

qualified and competent person.

INSTALLING THE COOKER HOOD

The manufacturer disclaims any responsibility for

damage due to incorrect installation of the cooker

hood or if the hood is not installed in compliance with

relevant regulations controlling this type of

installation.

Unpacking

The cooker hood is supplied with the following

components for installation:

• Canopy (C), including controls, worktop

illumination and fan unit.

• U-shaped upper chimney section (S).

• U-shaped lower chimney section (I).

• Metal recirculation plate (T).

• 120mm ducting spigot (A).

Fixing kit comprising:

• Wall fixing brackets (1,2 and 3).

• Document pack.