Electrolux EECH6001S Panduan Buku Pegangan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Buku Pegangan Pemilik untuk Kap Ventilasi Electrolux EECH6001S. Electrolux EECH6001S 8 halaman.

Halaman Cetak

2 This filter cannot be cleaned or reused.

3 As a general rule, the activated

charcoal filter should be replaced once

every four months.

4 Fitting: Fit one charcoal filter on the left

and one on the right so to cover the plastic

grids that protect the fan wheel. Secure

by rotaing the charcoal filter until it locks

into place.

5 Always specify the hood model code

number and serial number when ordering

replacement filters. This information is

shown on the rating plate located on the

inside of the unit.

6 The charcoal filter can be ordered from

your local Service Center. Alternatively

contact Electrolux Customer Service on

0800 222 825

OPERATION

Best results are obtained by using low speed

for normal conditions and a high speed when

odours are more concentrated. Turn the

hood on a few minutes before you start

cooking. It should be left on after cooking

for about 15 minutes or until all odours have

disappeared.

Press button switch controls

1 3 control switches for the motor (speed

positions 1, 2 and 3)

2 Off button of the motor

3 On/Off light of the motor

4 Light switch

Correct ventilation

For the hood to work correctly there must

be an under pressure in the kitchen. It is

important to keep the kitchen windows closed

and have a window in an adjacent room

open.

CLEANING

IMPORTANT

The hood must always be disconnected from

the electricity supply before beginning any

maintenance work.

Cleaning the hood

1 Clean the outside of the hood using a

damp cloth and a solution of water and

mild detergent liquid.

2 Never use corrosive, abrasive or

flammable cleaning products, or products

containing bleach.

3 Never insert pointed objects in the motor's

protective grid.

4 Only ever clean the switch panel and filter

grill using a damp cloth and mild detergent

liquid.

5 It is very important to clean the unit and

change the filters at the recommended

intervals. Failure to do so will cause

grease deposits to build up that could

constitute a fire hazard.

Metal grease filter

1 The purpose of the grease filters are to

absorb grease particles which form during

cooking and they must always be used,

either in the external extraction or internal

re-circulation function.

Attention: The metal grease filters must

be removed and washed, either by hand

or in a dishwasher, every four weeks.