- ページ 6

換気フード Electrolux EECH6001SのPDF オーナーズ・ハンドブック・マニュアルをオンラインで閲覧またはダウンロードできます。Electrolux EECH6001S 8 ページ。

2 This filter cannot be cleaned or reused.
3 As a general rule, the activated
charcoal filter should be replaced once
every four months.
4 Fitting: Fit one charcoal filter on the left
and one on the right so to cover the plastic
grids that protect the fan wheel. Secure
by rotaing the charcoal filter until it locks
into place.
5 Always specify the hood model code
number and serial number when ordering
replacement filters. This information is
shown on the rating plate located on the
inside of the unit.
6 The charcoal filter can be ordered from
your local Service Center. Alternatively
contact Electrolux Customer Service on
0800 222 825

OPERATION

Best results are obtained by using low speed
for normal conditions and a high speed when
odours are more concentrated. Turn the
hood on a few minutes before you start
cooking. It should be left on after cooking
for about 15 minutes or until all odours have
disappeared.
Press button switch controls
1 3 control switches for the motor (speed
positions 1, 2 and 3)
2 Off button of the motor
3 On/Off light of the motor
4 Light switch
3
4
2
1
6
Correct ventilation
For the hood to work correctly there must
be an under pressure in the kitchen. It is
important to keep the kitchen windows closed
and have a window in an adjacent room
open.
CLEANING
IMPORTANT
The hood must always be disconnected from
the electricity supply before beginning any
maintenance work.
Cleaning the hood
1 Clean the outside of the hood using a
damp cloth and a solution of water and
mild detergent liquid.
2 Never use corrosive, abrasive or
flammable cleaning products, or products
containing bleach.
3 Never insert pointed objects in the motor's
protective grid.
4 Only ever clean the switch panel and filter
grill using a damp cloth and mild detergent
liquid.
5 It is very important to clean the unit and
change the filters at the recommended
intervals. Failure to do so will cause
grease deposits to build up that could
constitute a fire hazard.
Metal grease filter
1 The purpose of the grease filters are to
absorb grease particles which form during
cooking and they must always be used,
either in the external extraction or internal
re-circulation function.
Attention: The metal grease filters must
be removed and washed, either by hand
or in a dishwasher, every four weeks.