Electrolux ICON RH36WC60GS Panduan Pemasangan, Penggunaan & Perawatan - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan & Perawatan untuk Kap Ventilasi Electrolux ICON RH36WC60GS. Electrolux ICON RH36WC60GS 22 halaman. 30” et 36” hotte aspirante
Juga untuk Electrolux ICON RH36WC60GS: Spesifikasi (2 halaman), Katalog Suku Cadang Pabrik (4 halaman), Panduan Pemasangan, Penggunaan & Perawatan (21 halaman), Panduan Pemasangan, Penggunaan & Perawatan (22 halaman), Panduan Penggunaan & Perawatan (44 halaman), (Bahasa Inggris) Panduan Pemasangan, Penggunaan, dan Perawatan (22 halaman), (Bahasa Prancis) Panduan Pemasangan, Penggunaan, dan Pemasangan (22 halaman)
Halaman Cetak
Special functions
Clock pr
Clock programming
Clock pr
ogramming
ogramming
ogramming
Clock pr
Clock pr
ogramming
The clock can be reprogrammed at any time except during an active timed function.
The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59.
The clock can be reprogrammed pressing the "T T T T T imer
adjusted with the "
" and "
The user can have minute increments / decrements of 1 minute, but if the user keep pressing the "
"
" buttons for more than 1 second, the increments / decrements will be of 5 minutes.
During this option the control will round to the nearest 5 minutes.
The user can nish on reprogramming the clock pressing the " T T T T T imer
After 1 minute of no button pressed the control will accept the programmed clock time and will add one
minute to the set clock.
Gr Gr Gr Gr Grease lter saturation alarm
ease lter saturation alarm
ease lter saturation alarm
ease lter saturation alarm
ease lter saturation alarm
After thirty fan functional hours, the display will show " Gr Gr Gr Gr Grease Filter
When this icon is shown in the display, the grease lters installed are required to be washed.
To reset the grease lter saturation alarm the user must press the "
action the icon " Gr Gr Gr Gr Grease lter
ease lter
ease lter" is not displayed, and the hood has the normal display operation.
ease lter
ease lter
Char
Char
coal lter saturation alarm (Recir
coal lter saturation alarm (Recir
Char
Charcoal lter saturation alarm (Recir
Char
coal lter saturation alarm (Recir
coal lter saturation alarm (Recirculating accessories)
After one hundred and twenty functional hours of the fan, the display will show " Char
is active. When this icon ashes on display, the charcoal lters installed are required to be replaced or
reactivated.
To reset the charcoal lter saturation indication the user must press the "
Char
Char
this time the icon " Char
Char
Char coal lter
Audible signal activation and deactivation
Audible signal activation and deactivation
Audible signal activation and deactivation
Audible signal activation and deactivation
Audible signal activation and deactivation
The audible signals can be activated or deactivated pressing the "Light
If the audible signal is activated, a tone must sound and the " Snd
2 seconds.
If the audible signal is deactivated, the " Snd
tone must sound.
Char
Charcoal lter inclusion and exclusion (Recir
Char
coal lter inclusion and exclusion (Recir
coal lter inclusion and exclusion (Recirculating accessories)
coal lter inclusion and exclusion (Recir
Char
Char
coal lter inclusion and exclusion (Recir
The charcoal lter inclusion or exclusion can be set by pressing the "
time for 5 seconds.
The Inclusion or exclusion of charcoal lter must be selected while the lamps and the motor are OFF .
When the charcoal lter has been excluded, the charcoal lter alarm is disabled.
Heat sensor
Heat sensor
Heat sensor
Heat sensor
Heat sensor
The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat
158° F
158° F
70°C
70°C
occurs (over 158° F
158° F or 70°C
158° F
70°C) surrounding the control area.
70°C
If the blower is OFF or if it is operating at rst speed, the blower will be set automatically to second speed,
the display shows the word " CArE
During this state, the user may raise the blower speed to third speed but can not decrease the speed.
When the temperature level on the hood drops to normal, the blower will operate in the setting de ned by
the user before the alarm occured.
Control buttons - Special functions
imer
imer
imer
imer" button for 5 seconds, and after, the clock can be
" buttons. Colon ":" will ash indicating clock programming mode.
culating accessories)
culating accessories)
culating accessories)
culating accessories)
coal lter
coal lter
coal lter
coal lter" is not displayed and the hood has the normal display operation.
Snd
Snd
Snd" symbol must appear on the display for 2 seconds and no
Snd
culating accessories)
culating accessories)
culating accessories)
culating accessories)
CArE
CArE
CArE" to indicate that heat sensor has detected an excessive heat.
CArE
imer
imer
imer" button.
imer
ease Filter
ease Filter
ease Filter
ease Filter" if the fan is active.
" button for 5 seconds, after this
Char
Char
Char coal Filter
Char
" button for 5 seconds, after
Light" button for 5 seconds.
Light
Light
Light
Snd
Snd
Snd" symbol must appear on the display for
Snd
" and "
" buttons at the same
"/
coal Filter
coal Filter" if the fan
coal Filter
coal Filter
17 17
17 17
17