Electrolux ICON RH36WC60GS Instrukcja instalacji, użytkowania i konserwacji - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja instalacji, użytkowania i konserwacji dla Okap wentylacyjny Electrolux ICON RH36WC60GS. Electrolux ICON RH36WC60GS 22 stron. 30” et 36” hotte aspirante
Również dla Electrolux ICON RH36WC60GS: Specyfikacje (2 strony), Katalog części fabrycznych (4 strony), Instrukcja instalacji, użytkowania i konserwacji (21 strony), Instrukcja instalacji, użytkowania i konserwacji (22 strony), Instrukcja obsługi i konserwacji (44 strony), (Angielski) Instrukcja instalacji, użytkowania i konserwacji (22 strony), (Francuski) Podręcznik instalacji, użytkowania i konserwacji (22 strony)

Drukuj stronę

Electrolux ICON RH36WC60GS Instrukcja instalacji, użytkowania i konserwacji

Special functions

Clock pr

Clock programming

Clock pr

ogramming

Clock pr

ogramming

The clock can be reprogrammed at any time except during an active timed function.

The clock can be displayed in a twelve hour format and valid clock times are from 1:00 to 12:59.

The clock can be reprogrammed pressing the "T T T T T imer

adjusted with the "

" and "

The user can have minute increments / decrements of 1 minute, but if the user keep pressing the "

" buttons for more than 1 second, the increments / decrements will be of 5 minutes.

During this option the control will round to the nearest 5 minutes.

The user can nish on reprogramming the clock pressing the " T T T T T imer

After 1 minute of no button pressed the control will accept the programmed clock time and will add one

minute to the set clock.

Gr Gr Gr Gr Grease lter saturation alarm

ease lter saturation alarm

After thirty fan functional hours, the display will show " Gr Gr Gr Gr Grease Filter

When this icon is shown in the display, the grease lters installed are required to be washed.

To reset the grease lter saturation alarm the user must press the "

action the icon " Gr Gr Gr Gr Grease lter

ease lter

ease lter" is not displayed, and the hood has the normal display operation.

ease lter

Char

coal lter saturation alarm (Recir

Char

Charcoal lter saturation alarm (Recir

Char

coal lter saturation alarm (Recir

coal lter saturation alarm (Recirculating accessories)

After one hundred and twenty functional hours of the fan, the display will show " Char

is active. When this icon ashes on display, the charcoal lters installed are required to be replaced or

reactivated.

To reset the charcoal lter saturation indication the user must press the "

Char

this time the icon " Char

Char

Char coal lter

Audible signal activation and deactivation

The audible signals can be activated or deactivated pressing the "Light

If the audible signal is activated, a tone must sound and the " Snd

2 seconds.

If the audible signal is deactivated, the " Snd

tone must sound.

Char

Charcoal lter inclusion and exclusion (Recir

Char

coal lter inclusion and exclusion (Recir

coal lter inclusion and exclusion (Recirculating accessories)

coal lter inclusion and exclusion (Recir

Char

coal lter inclusion and exclusion (Recir

The charcoal lter inclusion or exclusion can be set by pressing the "

time for 5 seconds.

The Inclusion or exclusion of charcoal lter must be selected while the lamps and the motor are OFF .

When the charcoal lter has been excluded, the charcoal lter alarm is disabled.

Heat sensor

The control is equipped with a heat sensor that will turn on the blower at second speed if excessive heat

158° F

70°C

occurs (over 158° F

158° F or 70°C

158° F

70°C) surrounding the control area.

70°C

If the blower is OFF or if it is operating at rst speed, the blower will be set automatically to second speed,

the display shows the word " CArE

During this state, the user may raise the blower speed to third speed but can not decrease the speed.

When the temperature level on the hood drops to normal, the blower will operate in the setting de ned by

the user before the alarm occured.

Control buttons - Special functions

imer

imer" button for 5 seconds, and after, the clock can be

" buttons. Colon ":" will ash indicating clock programming mode.

culating accessories)

coal lter

coal lter" is not displayed and the hood has the normal display operation.

Snd

Snd" symbol must appear on the display for 2 seconds and no

Snd

culating accessories)

CArE

CArE" to indicate that heat sensor has detected an excessive heat.

CArE

imer

imer" button.

imer

ease Filter

ease Filter" if the fan is active.

" button for 5 seconds, after this

Char

Char coal Filter

Char

" button for 5 seconds, after

Light" button for 5 seconds.

Light

Snd

Snd" symbol must appear on the display for

Snd

" and "

" buttons at the same

coal Filter

coal Filter" if the fan

coal Filter

17 17