DRIBO Flc GB R N Petunjuk Untuk Perakitan, Pengoperasian, dan Pemeliharaan - Halaman 4
Jelajahi secara online atau unduh pdf Petunjuk Untuk Perakitan, Pengoperasian, dan Pemeliharaan untuk Kabel dan konektor DRIBO Flc GB R N. DRIBO Flc GB R N 10 halaman. Outdoor load disconnectors
Halaman CetakThe device must reliably reach the stops in both limit positions.
After making contacts several times and checking the correct function of the drive and disconnector, check that all
joints are tightened properly.
After testing, secure the T drive (Fig. 1 and 2, respectively, pos. 1) with the band.
Assembly of the drive of disconnectors type GB R N with one bearing
Disconnectors for installation under the line (continuous, branching – for 10.5 poles)
1.
T-type manual drive
2.
Sleeve assembly R178
3.
Banding-type intermediate bearing (with barrel, flattened tube up, clamping terminal down)
4.
5.
Lower pull rod tube (to drive/adjustable)
6.
7.
Upper pull rod tube (flattened/flattened)
8.
Operating lever of the device (part of the device)
9.
Sleeve assembly R130 (2 pcs)
Assembly of the drive is identical also to disconnectors Fla 15/60 GB R N.
Fig. 1
4