DRIBO Flc GB R N Petunjuk Untuk Perakitan, Pengoperasian, dan Pemeliharaan - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Untuk Perakitan, Pengoperasian, dan Pemeliharaan untuk Kabel dan konektor DRIBO Flc GB R N. DRIBO Flc GB R N 10 halaman. Outdoor load disconnectors

Halaman Cetak
Assembly of the drive of disconnectors type GB R N with two bearings
Disconnectors into the line (on the tope of a pole – for 10.5m and 12m poles) and disconnectors for mounting
under the lines (continuous, branching – for 12m poles)
1.
T-type manual drive
2.
Sleeve assembly R178
3.
Upper banding-type intermediate bearing (with barrel, flattened tube up, clamping terminal down)
4.
Lower banding-type intermediate bearing (flattened tube up, flattened tube down)
5.
Lower pull rod tube (to drive/flattened, length 2000)
6.
Middle pull rod tube (flattened/adjustable, length 3000)
7.
Upper pull rod tube (flattened/flattened, length 2500)
8.
Operating lever of the device (part of the device)
9.
Sleeve assembly R120 (2 pcs, the upper one with the middle cable suspension), for disconnectors for
mounting under the line – sleeve assembly R130 (2 pcs)
Assembly of the drive is identical also for disconnectors Fla 15/60 GB R N and for disconnectors Fla
15/60 GB R and Flc GB R N in the case of suspension mounting on a 12m pole.
Fig. 2
5