21st Century Alarms LuxHome Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan 21st Century Alarms LuxHome. 21st Century Alarms LuxHome 5 halaman. Wireless alarm system

Halaman Cetak
st
21
Century Alarms
Alarm & CCTV Solutions
www.21stcenturyalarms.co.uk

Changing Batteries

1, Put the Alarm in Test Mode, this will disable the Tamper Activation of the System.
With the system in Standby Mode with the Power LED ON, press:
2, Change the Detector Battery(s), when finished
Press
to leave Test mode and return to Standby.
Remote Control
When the Remote Control is operated under low battery conditions the transmit LED will
continue to flash after the button has been released.
 Under normal battery conditions the LED will extinguish when the button is released.
Remote Keypad
1. Enter the user code "Twice"
disable Tamper activation.
2. Undo the fixing screw at bottom of Keypad and remove from the wall mounting
plate.
3. Undo the two fixing screws in the rear cover and remove the battery cover.
4. Replace battery with a new 9V PP3 Alkaline battery
5. Replace and fix the rear battery cover and then refit and secure the Keypad onto the
wall plate.
Security House, 107 Sandwich Close, Blackburn, Lancashire BB1 1PU
01254 265052
Low Battery Indication (RED LED)
0775 1360143
Intruder Alarms: Wired & Wireless
Alarm Central Monitoring
Commercial & Domestic CCTV
Alarm Service, Upgrades and Repairs
will flash for 20 seconds and