21st Century Alarms LuxHome 사용자 설명서 - 페이지 5

{카테고리_이름} 21st Century Alarms LuxHome에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 21st Century Alarms LuxHome 5 페이지. Wireless alarm system

Century Alarms

Alarm & CCTV Solutions

www.21stcenturyalarms.co.uk

Changing Batteries

1, Put the Alarm in Test Mode, this will disable the Tamper Activation of the System.

With the system in Standby Mode with the Power LED ON, press:

2, Change the Detector Battery(s), when finished

Press

to leave Test mode and return to Standby.

Remote Control

When the Remote Control is operated under low battery conditions the transmit LED will

continue to flash after the button has been released.

 Under normal battery conditions the LED will extinguish when the button is released.

Remote Keypad

1. Enter the user code "Twice"

disable Tamper activation.

2. Undo the fixing screw at bottom of Keypad and remove from the wall mounting

plate.

3. Undo the two fixing screws in the rear cover and remove the battery cover.

4. Replace battery with a new 9V PP3 Alkaline battery

5. Replace and fix the rear battery cover and then refit and secure the Keypad onto the

wall plate.

Security House, 107 Sandwich Close, Blackburn, Lancashire BB1 1PU

01254 265052

Low Battery Indication (RED LED)

0775 1360143

Intruder Alarms: Wired & Wireless

Alarm Central Monitoring

Commercial & Domestic CCTV

Alarm Service, Upgrades and Repairs

will flash for 20 seconds and