Atlas DAGNY Petunjuk Manual - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kipas angin Atlas DAGNY. Atlas DAGNY 10 halaman. Ceiling mounted rotational fan

Atlas DAGNY Petunjuk Manual
READ AND SAVE THESE SAFETY AND INSTAllATION
Consult a licensed electrician if unsure of any point below mentioned.
DANGERIWARNING/CAUTION
1. Hi9.hvoltage and. moving parts around motors and motor driven equipment can cause
senous or fatal InJunes. Always disconnect power source at main switch before wiring,
servicing or cleaning unit. Do not rely on fan control device to prevent unexpected
start-up or electrical shock. In addition, power supply must have fuses or circuit
breakers for short circuit protection.
2. All electrical wiring must conform to national and local electrical codes such as: NEC,
OSHA, etc.
3. Fan should be secure in its electrical grounding to avoid possible electrical shock.
4. Fan should not be used in any wet or hazardous location defined by article 500 of the
NEC. In addition, its ambient temperature should not exceed 104 degrees Fahrenheit.
5. Power supply should conform to voltage rating of 120V.
6. Before applying power, visually re-inspect the installation. Make sure that all guards
and protective devices are securely in place and all visible screws and bolts are
tightened.
7. Warning: to reduce the risk of fire, electrical shock or personal injury, mount hanging
bracket to outlet box marked "Acceptable for fan support and a hanging weight of 45
Lbs." Do not mount fan to sheet rock or drywall type materials and use only the screws
provided with the oullet box.
8. Caution: to reduce the risk of injury to persons, install fan so that bottom edges of fan
blades are to be:
**In Canada, to satisfy CSA requirements: at least 8.3 FU2.5 M above the floor and all
objects in room if safety cages are utilized. 10.0 Ft if safety cages are not utilized.
**In the US, to satisfy UL requirements: at least 7.0 Ft above the floor and all objects in
room if safety cages are utilized. 10.0 Ft. if safety cages are not utilized.
9. To reduce the risk of personal injury, do not bend blades or any other part of fan when
cleaning. Do not insert foreign objects in between rotating fan blades or in space
surrounding entire rotating fan unit. Fan must be turned off at power at supply source
before installation, cleaning or servicing.
10. Instructions for Supply Connections: Conductor of a fan identified as grounded
conductor to be connected to a grounded conductor of a power supply, conductor of
fan identified as ungrounded conductor to be connected to an ungrounded conductor
of a power supply, conductor oUan identified for equipment grounding to be connected
to an equipment-grounding conductor. After making the wire connections in junction
box, the splices should be turned upward and pushed carefully into the outlet box. The
wires should be spread apart with the grounded conductor and the fan-grounding
conductor on one side of the junction box and the ungrounded conductor on the other
side of the oullet box. Be sure that all wiring connections are properly insulated from
each other and any surrounding metal parts. For safety and best operating results, we
recommend that you have a qualified electrician assemble and install your fan.
INSTRUCTIONS.
2