Bose 301 Series III Panduan Servis - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Servis untuk Pembicara Bose 301 Series III. Bose 301 Series III 13 halaman. Direct/reflecting
Juga untuk Bose 301 Series III: Panduan Pemilik (10 halaman)

Halaman Cetak

2. Replacing the Tweeters

NOTE: The positive terminal of each tweeter is marked with a red dot.

A. The upper and lower tweeters are mounted on brackets. Refer to Figure 3. Remove one

(1) screw which secures either tweeter to its bracket. Lift the tweeter away from the bracket

and cut the wires connected to the tweeter as close to the tweeter terminals as possible.

Strip the wires and connect to the replacement tweeter. The tweeters should be wired as

follows:

(1). Upper Tweeter-Make sure that the red wire is connected to the positive (+) terminal

and the grey wire is connected to the negative (-) terminal.

(2). Lower Tweeter-Make sure that the grey wire is connected to the positive (+) terminal

and the black wire is connected to the negative (-) terminal.

REMOUNTING THE GRILLE

A. The grille can only be remounted one way (see Figure 3). Align the grille feet with the 6

grille fasteners. Press in lightly until the grille feet are engaged by the grille fasteners. The

grille assembly should be flush with the front and side of the cabinet. The nameplate should

be located near the bottom side of the grille. See Figure 3.