Bose 301 Series III 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Bose 301 Series III에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 301 Series III 13 페이지. Direct/reflecting
Bose 301 Series III에 대해서도 마찬가지입니다: 소유자 매뉴얼 (10 페이지)

페이지 인쇄

2. Replacing the Tweeters

NOTE: The positive terminal of each tweeter is marked with a red dot.

A. The upper and lower tweeters are mounted on brackets. Refer to Figure 3. Remove one

(1) screw which secures either tweeter to its bracket. Lift the tweeter away from the bracket

and cut the wires connected to the tweeter as close to the tweeter terminals as possible.

Strip the wires and connect to the replacement tweeter. The tweeters should be wired as

follows:

(1). Upper Tweeter-Make sure that the red wire is connected to the positive (+) terminal

and the grey wire is connected to the negative (-) terminal.

(2). Lower Tweeter-Make sure that the grey wire is connected to the positive (+) terminal

and the black wire is connected to the negative (-) terminal.

REMOUNTING THE GRILLE

A. The grille can only be remounted one way (see Figure 3). Align the grille feet with the 6

grille fasteners. Press in lightly until the grille feet are engaged by the grille fasteners. The

grille assembly should be flush with the front and side of the cabinet. The nameplate should

be located near the bottom side of the grille. See Figure 3.