Bose 802 C II Panduan Pemilik - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembicara Bose 802 C II. Bose 802 C II 22 halaman. System controllers
Juga untuk Bose 802 C II: Panduan Servis (20 halaman), Panduan Servis (23 halaman)

Halaman Cetak

Remove the plastic plug covering the internal protection circuit harness opening.

Appendix A:

Installing The

oC-1 option Card

NOTE: The OC-1 option card can be purchased

and installed ONLY through an authorized Bose

Service Center or dealer. It is not user-installable.

A.1 Installing The Internal

1. Unplug the systems controller. Disconnect all

2. Remove the four Phillips head screws from the

3. Slide the cover toward you. Then lift it off.

4. Find the plastic plug in the controller rear panel

Figure 23

Remove the four Phillips head screws.

Figure 24

Protection Circuit Harness

audio connections. Turn it so the rear panel

faces you (Figure 3).

cover (Figure 3). Set them safely aside.

(Figure 4). Pinch the top lock tab and push the

plug partially out (Figure 4b). Release the tab

and pull the plug the rest of the way out.