Bose Sub2 Panduan Pemilik - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara Bose Sub2. Bose Sub2 14 halaman. Powered bass modules
Juga untuk Bose Sub2: Pembaruan Firmware (4 halaman), Pembaruan Firmware (44 halaman), Data Teknis Awal (9 halaman), Manual (2 halaman)
Important Safety Instructions
Please read and keep all safety and use instructions.
Important Safety Instructions
Bose Corporation hereby declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU and
all other applicable EU directive requirements. The complete declaration of
conformity can be found at: www.Bose.com/compliance.
1.
Read these instructions.
2. Keep these instructions.
3.
Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has
been damaged in any way such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNINGS/CAUTIONS
This symbol on the product means there is uninsulated, dangerous voltage within
the product enclosure that may present a risk of electrical shock.
This symbol on the product means there are important operating and maintenance
instructions in this guide.
Contains small parts which may be a choking hazard. Not suitable for children
under age 3.
This product contains magnetic material. Consult your physician on whether this
might affect your implantable medical device.
Use at altitude less than 2000 meters only.
This symbol on the product means there is a tip-over hazard when using a pole
mount.
Do not alter, modify, or remove the sliding cover over the power input of the Sub1/
Sub2. There is uninsulated, dangerous voltage within the product enclosure that
may present a risk of electrical shock.
• The pole-mount M20 threaded insert on the Sub1 and Sub2 is designed to support a
pole of up to 1.3 meters (51 inches) with a Bose S1 Pro mounted on the pole. Do not use
the Sub1 or Sub2 with a pole exceeding 1.3 meters (51 inches) in height or a loudspeaker
weight that exceeds 7.1 kilograms (15.7 pounds). Using a pole/loudspeaker combination
that exceeds either of these limits or creates an unstable mounting scenario may lead to
a hazardous condition that could result in injury.
• Do NOT make unauthorized alterations to this product.
• Do NOT use in vehicles or boats.
• Do NOT place the product in a confined space such as in a wall cavity or in an enclosed
cabinet while in use.
• Keep the product away from fire and heat sources. Do NOT place naked flame sources,
2 • English
such as lighted candles, on or near the product.
• To reduce the risk of fire or electrical shock, do NOT expose the product to rain, liquids,
or moisture.
• Do NOT expose this product to dripping or splashing and do not place objects filled with
liquids, such as vases, on or near the product.
• Do NOT use a power inverter with this product.
• Provide an earth connection or ensure the socket outlet incorporates a protective
earthing connection before connecting the plug to the mains socket outlet.
• Where the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
Regulatory Information
The product, in accordance with the Ecodesign Requirements for Energy Related Products
Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation
(EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.
Required Power State Information
Power consumption in specified power mode, at
230V/50Hz input
Time after which equipment is automatically
switched into mode
Power consumption in networked standby if all
wired network ports are connected and all wireless
network ports are activated, at 230V/50Hz input
Network port deactivation/activation procedures.
Deactivating all networks will enable standby
mode.
Sub1
53.0 × 25.0 × 53.0 cm
Dimensions (H × W × D)
(20.9 × 9.8 × 20.9 in)
16.1 kg
Net Weight
(35.5 lb)
Input Rating
100–240 VAC, 3 A, 50/60 Hz
Initial turn on inrush
14.9 A at 120 V; 29.3 A at 230 V 15.2 A at 120 V; 28.6 A at 230 V
current
Inrush current after AC
5.8 A at 120 V; 32.0 A at 230 V
mains interruption of 5 s
Shielded cables are required to maintain regulatory compliance.
The product label is located on the bottom of the product.
Model: 431389G1 / 431389G2. The CMIIT ID is located on the bottom of the product.
CAN ICES-3 (B)/NMB-3(B)
Information About Products That Generate Electrical Noise (FCC Compliance Notice for US)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could void the user's
authority to operate this equipment.
Sub1/Sub2 Powered Bass Module • Owner's Guide
PRO.BOSE.COM
Power Modes
Networked
Standby
Standby
≤ 0.5 W
N/A*
4 hours
N/A*
N/A*
*Product does not utilize a networked
standby mode for a Bluetooth®
connection and does not have the
ability to be configured to a network
via Wi-Fi® or Ethernet
Sub2
69.0 × 30.5 × 55.0 cm
(27.2 ×12.0 × 21.7 in)
23.4 kg
(51.7 lb)
100–240 VAC, 4 A, 50/60 Hz
2.6 A at 120 V; 6.1 A at 230 V