Bose Sub2 Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Bose Sub2. Bose Sub2 14 stron. Powered bass modules
Również dla Bose Sub2: Aktualizacja oprogramowania sprzętowego (4 strony), Aktualizacja oprogramowania sprzętowego (44 strony), Wstępne dane techniczne (9 strony), Podręcznik (2 strony)

Drukuj stronę

Important Safety Instructions

Please read and keep all safety and use instructions.

Important Safety Instructions

Bose Corporation hereby declares that this product is in compliance with the

essential requirements and other relevant provisions of Directive 2014/53/EU and

all other applicable EU directive requirements. The complete declaration of

conformity can be found at: www.Bose.com/compliance.

Read these instructions.

2. Keep these instructions.

Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where it exits from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has

been damaged in any way such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within

the product enclosure that may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance

instructions in this guide.

Contains small parts which may be a choking hazard. Not suitable for children

under age 3.

This product contains magnetic material. Consult your physician on whether this

might affect your implantable medical device.

Use at altitude less than 2000 meters only.

This symbol on the product means there is a tip-over hazard when using a pole

mount.

Do not alter, modify, or remove the sliding cover over the power input of the Sub1/

Sub2. There is uninsulated, dangerous voltage within the product enclosure that

may present a risk of electrical shock.

• The pole-mount M20 threaded insert on the Sub1 and Sub2 is designed to support a

pole of up to 1.3 meters (51 inches) with a Bose S1 Pro mounted on the pole. Do not use

the Sub1 or Sub2 with a pole exceeding 1.3 meters (51 inches) in height or a loudspeaker

weight that exceeds 7.1 kilograms (15.7 pounds). Using a pole/loudspeaker combination

that exceeds either of these limits or creates an unstable mounting scenario may lead to

a hazardous condition that could result in injury.

• Do NOT make unauthorized alterations to this product.

• Do NOT use in vehicles or boats.

• Do NOT place the product in a confined space such as in a wall cavity or in an enclosed

cabinet while in use.

• Keep the product away from fire and heat sources. Do NOT place naked flame sources,

2 • English

such as lighted candles, on or near the product.

• To reduce the risk of fire or electrical shock, do NOT expose the product to rain, liquids,

or moisture.

• Do NOT expose this product to dripping or splashing and do not place objects filled with

liquids, such as vases, on or near the product.

• Do NOT use a power inverter with this product.

• Provide an earth connection or ensure the socket outlet incorporates a protective

earthing connection before connecting the plug to the mains socket outlet.

• Where the mains plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

Regulatory Information

The product, in accordance with the Ecodesign Requirements for Energy Related Products

Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation

(EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.

Required Power State Information

Power consumption in specified power mode, at

230V/50Hz input

Time after which equipment is automatically

switched into mode

Power consumption in networked standby if all

wired network ports are connected and all wireless

network ports are activated, at 230V/50Hz input

Network port deactivation/activation procedures.

Deactivating all networks will enable standby

mode.

Sub1

53.0 × 25.0 × 53.0 cm

Dimensions (H × W × D)

(20.9 × 9.8 × 20.9 in)

16.1 kg

Net Weight

(35.5 lb)

Input Rating

100–240 VAC, 3 A, 50/60 Hz

Initial turn on inrush

14.9 A at 120 V; 29.3 A at 230 V 15.2 A at 120 V; 28.6 A at 230 V

current

Inrush current after AC

5.8 A at 120 V; 32.0 A at 230 V

mains interruption of 5 s

Shielded cables are required to maintain regulatory compliance.

The product label is located on the bottom of the product.

Model: 431389G1 / 431389G2. The CMIIT ID is located on the bottom of the product.

CAN ICES-3 (B)/NMB-3(B)

Information About Products That Generate Electrical Noise (FCC Compliance Notice for US)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user's

authority to operate this equipment.

Sub1/Sub2 Powered Bass Module • Owner's Guide

PRO.BOSE.COM

Power Modes

Networked

Standby

≤ 0.5 W

N/A*

4 hours

N/A*

*Product does not utilize a networked

standby mode for a Bluetooth®

connection and does not have the

ability to be configured to a network

via Wi-Fi® or Ethernet

Sub2

69.0 × 30.5 × 55.0 cm

(27.2 ×12.0 × 21.7 in)

23.4 kg

(51.7 lb)

100–240 VAC, 4 A, 50/60 Hz

2.6 A at 120 V; 6.1 A at 230 V