Advanced Radio Air Safe Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman Advanced Radio Air Safe. Advanced Radio Air Safe 12 halaman. Failsafe gear sequencer

Halaman Cetak

Fail Safe Screen

This screen shows you the (LV) Live or absolute system

pressure as well as the selected (FS) Fail Safe pressure.

To set the Fail Safe pressure (the pressure at which the

gear will be triggered to the down position) you:

Pump up the system pressure to the desired Fail

Safe pressure.

Move the cursor to the "SET FAIL SAFE" menu

item and press the joystick once.

The "SET FAIL SAFE' menu item will flash several times

and the current system pressure will be captured as the

fails safe trigger pressure. The FS 0.0 PSI will take on

the value of the system pressure and the "SET FAIL

SAFE" menu item will change to read "CLEAR FAIL

SAFE". From this point forward if the system pressure

drops below the Fail Safe pressure a gear down event will be triggered.

You can clear the Fail Safe pressure highlighting "CLEAR FAIL SAFE" and pressing the joystick.

Please Note: system pressures lower than the Fail Safe pressure will not allow

you to run the sequencer to the up position or allow system testing during set-

up so it is advisable to set the Fail Safe pressure after you have completed pro-

gramming the sequencer. You can clear the Fail Safe pressure trigger point at

any time by pressing "CLEAR FAIL SAFE"

Screens and Usage

RETURN

0.0

70.0

SET FAIL SAFE

RETURN

70.0

CLEAR FAIL SAFE

PSI