Bose CINEMATE 1 SR Panduan Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Teater Rumah Bose CINEMATE 1 SR. Bose CINEMATE 1 SR 16 halaman. Home theater speaker system
Juga untuk Bose CINEMATE 1 SR: Setup Manual (20 halaman), Panduan Pengoperasian (44 halaman), Setup Manual (40 halaman)
Halaman Cetak
CARE AND MAINTENANCE
Remote control
is
inconsistent
or
does not work
Sound is distorted
• Check the battery to be sure it is installed properly or needs to be
replaced. See "Replacing
the remote batteries"
on page 14.
• Point the remote control at the device you want to control.
• Check that the remote button for the selected source flashes when you
press the volume button.
• Check that the power indicator
on the speaker array flashes when you
press the remote volume or mute button.
• There may be more than one device code for your brand of device. Find
your device and brand in the Universal Device Codes book. Try program-
ming another code, then check the device for improved functionality.
• Make sure all cable connections
are secure on the speaker array, TV, and
other connected
sources.
• Make sure the protective
film has been removed from the speaker array
and the Acoustimass
®module.
• If the speaker array is connected
to a TV output labelled VARIABLE
(VAR), reduce the TV volume.
Sound is coming
° Turn off your TV's internal speakers.
from the TV
° Turn the TV volume all the way down.
TV does not
respond
to remote
commands
Picture is blurry
when viewing
3D
content
Intermittent
bass
° Make sure the speaker array is not blocking the IR sensor on the TV.
Change the position of the TV and speaker array so that the IR sensor is
not blocked.
• For details on the location of the TV's IR sensor, refer to the owner's
guide that came with your TV.
• Make sure your 3D glasses are tuned on.
• If the problem
persists, make sure the speaker array is not blocking the
IR sensor on the TV. Change the position of the TV and speaker array so
that the IR sensor is not blocked.
• For details on the location of the TV's IR sensor, refer to the owner's
guide that came with your TV.
• Check that the status indicator
on the Acoustimass
module is orange
and not blinking.
• If the speaker array status indicator is blinking orange:
• Check that the Acoustimass
module is plugged
into a live AC wall
outlet and the status indicator
is glowing
orange.
• Perform the pairing
procedure.
See "Pairing
the Acoustimass
®
module
with the speaker
array" on page 14.
• Try moving any possible
sources
of wireless interference,
such as a
wireless
computer
network
router, another wireless
device,
or a
microwave
oven, further
away from the CineMate ®system.
Too much or too
• Adjust the bass level using the bass control on the Acoustimass
module.
little bass
Refer to "Adjusting
the bass level" on page 6.
Red status
• System error. Call Bose Customer
Service.
indicator
English-
13