Bose CINEMATE 1 SR Panduan Pengoperasian - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Teater Rumah Bose CINEMATE 1 SR. Bose CINEMATE 1 SR 16 halaman. Home theater speaker system
Juga untuk Bose CINEMATE 1 SR: Setup Manual (20 halaman), Panduan Pengoperasian (44 halaman), Setup Manual (40 halaman)
Halaman Cetak
CARE AND MAINTENANCE
Pairing
the Acoustimass
® module
with the speaker
array
Your speaker array and Acoustimass
module are paired at the factory. However, should
you ever need to pair them for any reason, do the following:
1. Unplug the Acoustimass
module AC power cord.
2. Remove the door on the end of the speaker array.
3. Press and hold the ADAPTiQ ® button for 3-4 seconds until the status indicator starts
slowly blinking orange.
4. Plug the Acoustimass
module AC power cord in the AC outlet.
Pairing is complete when the Acoustimass
module status indicator becomes solid
orange and the speaker array status indicator turns off.
remote
batteries
Replacing
the
Replace both batteries when the remote control stops operating or its range seems
reduced. Alkaline batteries are recommended.
1. Slide open the battery compartment
cover on the back of the remote.
AA (IEC LR6)
batteries (2) _
Battery cover
2. Remove both batteries.
Be sure to dispose of the batteries according to the regulations in your area.
3. Insert two AA (IEC-LR6) 1.5V batteries, or the equivalent. Match the + and - symbols
on the batteries with the + and - markings inside the compartment.
4. Slide the battery compartment
cover back into place.
Cleaning
your
speaker
syste
• You can clean the surface of the speaker array and Acoustimass ®module with a soft,
dry cloth.
• Do not use any sprays near the speaker array. Do not use any solvents, chemicals,
or cleaning solutions containing alcohol, ammonia, or abrasives.
• Do not allow liquids to spill into any openings.
• The speaker grille requires no special care, although you may carefully vacuum it with
a brush attachment,
if necessary.
14 - English