Elegant Union Group G-600 Panduan Pemilik - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk panggangan Elegant Union Group G-600. Elegant Union Group G-600 13 halaman. Portable
3.
Push and turn control knob to "HIGH" setting. After lighting observe the burner flame, make sure all burner ports
are lighted--a blue/yellow flame of one to two inches from the burner ports should appear. If ignition does not
take place, turn the burner control knob to the "OFF" position. Wait five minutes with lid open for the gas to clear
and repeat the lighting procedure.
4.
Adjust burners to the desired cooking temperature.
Confirm that the burner is properly lit by agreeing with description below. If the flame pattern appears abnormal, consult
the troubleshooting guide on page 12 for corrective action.
FIG A
Flare-ups:
Normal: Soft blue flames with yellow
tips between I inch - 2 inches high.
"Flare-ups" sometimes occur when food drippings fall onto the hot heat plate or burner and ignite. Some flaring is normal
and desirable as it helps impart the unique flavors associated with grilled foods. Controlling the intensity of the flare-ups
is necessary, however, in order to avoid burned or unevenly cooked foods and to prevent the possibility of accidental fire.
WARNING:
Always monitor the grill closely when cooking and turn the flame level down (LOW) or OFF
if flare- ups intensify.
SHUTTING OFF THE BURNER
When you have finished using your barbecue, turn the control valve fully clockwise to the "Off " position, then promptly
disconnect the propane cylinder. Wait until the barbecue is sufficiently cool before closing its hood.
CLEANING, CARE AND MAINTENANCE
• All cleaning and maintenance should be carried out when the barbecue is cool and the gas cylinder is OFF.
• Never douse the barbecue with water when its surfaces are hot.
• Never handle hot parts with unprotected hands.
• Regularly clean your barbecue between uses and especially after extended periods of storage.
• In order to extend the life and maintain the condition of your barbecue, we strongly recommend that the barbecue be
covered when left outside for any length of time, especially during the winter months.
COOKING GRILL
Clean the cooking grid with hot soapy water. To remove any food residue, use a mild cream cleaner on a non-abrasive
pad. Rinse well and dry thoroughly.
BURNER
In normal usage, burning off the residue after cooking will keep the burner clean. The burner should be removed and
cleaned annually, or whenever heavy build-up is found, to ensure that there are no signs of blockage (debris, insects) in
either the burner portholes or the venture tube. Use a pipe cleaner to clear obstructions. A wire brush can be used to
remove corrosion from the burner surfaces. When refitting the burner, be careful to check that the venture tube of the
burner fit over the valve outlet.
Clean burner holes with a heavy duty pipe cleaner.
Observe flame height when lit:
Flame should be a blue/yellow color between 1 to 2 inches high.
FIG B
Out of adjustment: Noisy hard blue
flames – too much air
11
FIG C
Poor combustion: Wavy, yellow
flames- too little air.