DROTSKY Engineering M100 Panduan Operator - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Operator untuk Alat Listrik DROTSKY Engineering M100. DROTSKY Engineering M100 6 halaman. Hammer mill

3. START AND USE

Prior to start-up

Inspect the hammer mill for any damages that could have occurred

during transport. For hydraulically driven models ensure that all hy-

draulic fittings and piping are connected and tightened. There are only

two pipes that need to be connected during assembly. The pressure

and return line. Check hydraulic tank level.

Check the machine for any loosened bolts and nuts

Remove lifting lugs from the bale conveyor. Position indicated above

by the yellow outlined triangle. Adjust the conveyor feet onto the floor

and lock in position. These should be adjusted so that the conveyor

front and back are level. These are positioned upward when opening

the door. Shown above within the yellow rectangle. Remove any for-

eign materials from the conveyor belt. Remove any foreign material

form the hammer mill chamber.( This includes the spare screen). Turn

the bale shredder by hand to ensure no collision is prominent.