anko KE3046-SA Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Ketel anko KE3046-SA. anko KE3046-SA 7 halaman.

anko KE3046-SA Panduan Pengguna
KNOW YOUR ELECTRIC CORDLESS KETTLE
BEFORE USING YOUR ELECTRIC CORDLESS KETTLE
If you are using the kettle for the first time, it is recommended to clean the kettle before use
by boiling the kettle with MAX. capacity of water once, and then discarding the water and
rinse it again with fresh water from the tap. Wipe the surface with a damp cloth.
NOTE: The MAX capacity of kettle is 1.5L.
USING YOUR ELECTRIC CORDLESS WATER KETTLE
1. Place the kettle on a flat stable surface.
2. To fill water into the kettle, remove it from the power base and open the lid by lifting up
the lid. Fill with the desired amount of water to the kettle. Always fill the kettle between
the MIN. (0.5L) and MAX. (1.5L) fill marks. Too little water will result in the kettle
switching OFF prematurely before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout
when boiling. Ensure that the lid is firmly pushed down in place before connecting into a
power outlet socket.
3. Position the kettle on the power base.
4. Connect the supply power cord plug into a mains power outlet. Press the power switch
down and its indicator will light up, and then the kettle starts to boil the water. The kettle
will switch OFF automatically and the indicator will turn OFF once the water has boiled. To
4