anko KE3046-SA 사용자 설명서 - 페이지 4

{카테고리_이름} anko KE3046-SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko KE3046-SA 7 페이지.

KNOW YOUR ELECTRIC CORDLESS KETTLE

BEFORE USING YOUR ELECTRIC CORDLESS KETTLE

If you are using the kettle for the first time, it is recommended to clean the kettle before use

by boiling the kettle with MAX. capacity of water once, and then discarding the water and

rinse it again with fresh water from the tap. Wipe the surface with a damp cloth.

NOTE: The MAX capacity of kettle is 1.5L.

USING YOUR ELECTRIC CORDLESS WATER KETTLE

1. Place the kettle on a flat stable surface.

2. To fill water into the kettle, remove it from the power base and open the lid by lifting up

the lid. Fill with the desired amount of water to the kettle. Always fill the kettle between

the MIN. (0.5L) and MAX. (1.5L) fill marks. Too little water will result in the kettle

switching OFF prematurely before the water has boiled.

NOTE: Do not fill the water over the maximum level, as water may spill out of the spout

when boiling. Ensure that the lid is firmly pushed down in place before connecting into a

power outlet socket.

3. Position the kettle on the power base.

4. Connect the supply power cord plug into a mains power outlet. Press the power switch

down and its indicator will light up, and then the kettle starts to boil the water. The kettle

will switch OFF automatically and the indicator will turn OFF once the water has boiled. To