anko BL2006-SA Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Blender anko BL2006-SA. anko BL2006-SA 13 halaman. Portable usb blender
CHARGING MODE:
a. When the product is charging, the LED indicator light will light up in red.
b. When fully charged, the LED indicator light will light up in white.
WORKING MODE:
There is only one speed. The specific functions are as follows:
① Double-click the button switch. The indicator light will turn white, and the product runs
at full speed. When the working voltage is lower than 7.2V, the indicator light will turn red
and flash three times, and the machine will stop running. If the indicator light flashes during
the operation, it means the battery is almost exhausted and require re-charging.
② If stalling occurs during the operation, the product will stop immediately, and the white
indicator light will turn off.
③ During the working process, press the button switch once, and the blender will stop
operating.
④ The red indicator light is always be ON during the charging process, and the white
indicator light is displayed after the charging is completed and the blender is ready to use.
WARNING: The maximum operating time is 40 seconds. Allow it to rest for at least 3
minutes before using it again. After 5 cycles of operation, allow the main unit (electric
motor) to cool down to room temperature. Allow it to cool down for approx. 30
minutes before using it again.