- ページ 6

ブレンダー anko BL2006-SAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。anko BL2006-SA 13 ページ。 Portable usb blender

CHARGING MODE:

a. When the product is charging, the LED indicator light will light up in red.

b. When fully charged, the LED indicator light will light up in white.

There is only one speed. The specific functions are as follows:

① Double-click the button switch. The indicator light will turn white, and the product runs

at full speed. When the working voltage is lower than 7.2V, the indicator light will turn red

and flash three times, and the machine will stop running. If the indicator light flashes during

the operation, it means the battery is almost exhausted and require re-charging.

② If stalling occurs during the operation, the product will stop immediately, and the white

indicator light will turn off.

③ During the working process, press the button switch once, and the blender will stop

operating.

④ The red indicator light is always be ON during the charging process, and the white

indicator light is displayed after the charging is completed and the blender is ready to use.

WARNING: The maximum operating time is 40 seconds. Allow it to rest for at least 3

minutes before using it again. After 5 cycles of operation, allow the main unit (electric

motor) to cool down to room temperature. Allow it to cool down for approx. 30

minutes before using it again.