ANLIDAR MYTORQ MY-SAVER Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur ANLIDAR MYTORQ MY-SAVER. ANLIDAR MYTORQ MY-SAVER 16 halaman.
Halaman Cetak
BARCODE
SETTING
How to select/switch
Job by barcode
scanning
BATCH MODE
TIME SETTING
SETUP PRODUCT
serial number
PASSWORD
INTERNET
SETTING
ACOUSTIC MODE
LANGUAGE
Barcode Enable
Start signal setting
5. Program setting
Name
Screw step
Program Name
RPM
Option
Direction
Delay Time
Target Thread
Target Torque
Hi Torque Kg.cm
Lo Torque Kg.cm
Hi Thread
Lo Thread
Define a valid
Below steps will show you how to use certain
barcode range
section of a barcode to select/switch Job.
Step 1. Determine the initial point of the
From：01~54
section (01-20)
Bits：01~54
Step 2. Determine section size (01-20)
To Binding JOB
Step 3. Assign selected section to Job (01-50)
(01~50)
INC/DEC
Select count up or count down
YYYY/MM/DD
Set up controller time
HH：MM：SS
Year/Month/Day/Hour/Minute
/Second.
Serial Number
Display device product serial number.
0000~9999
Set up password lock
Offline/Online/RS
Select data output from offline
to online
-232
On/Off
Setup buzzer.
Chinese/
Select language
English
Off /On
Turn on the barcode enable function and scan
the barcode before starting to work, or turn
off the function to start work without scan
barcode.
Motor/Start
Duration of start signal when screwdriver is
Signal
stopped.
Motor：The start signal disappears when
screwdriver is stopped.
Start signal：When the driver is stopped, the
start switch (press lever plate/ push down/
external signal) is released. The start signal
disappears.
Set Up Value
001~250
Step can set the speed, target value (torque
/ time / number of turns)...
******
Setup program name, it can
choose number、capitals and
lower case letters、number for
program name.
Please refer to the
Setup rotation speed (According
specification of
to screwdriver type
screwdrivers
Q/C
Setup tightening target
CW/CCW
Setup rotation direction
0.0~9.9
Setup interval time between screws
000.0~999.9
Setup target no. of thread
Please refer to the
Setup target torque
specification of
screwdrivers
000.01~99.99
Setup max. torque value
000.00~99.98
Setup min. torque value
000.1~499.9
Setup max. thread value
000.0~499.8
Setup min. thread value
Function Description
7
Job：01
From：01
Bits：01
DEC
2018/01/01
01：01：01
Product Barcode
0000
RS-232
On
English
OFF
Motor
Default setting
01
******
Please refer to the
specification of
screwdrivers
Q
CW
0.8
005.0
Please refer to the
specification of
screwdrivers
005.00
000.00
499.9
000.0