Absolare Push-Pull Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Absolare Push-Pull. Absolare Push-Pull 14 halaman.
Juga untuk Absolare Push-Pull: Panduan Pengguna (15 halaman)

Halaman Cetak

6.2.1. 845 Bias Levels

You have to adjust left and right 845 tube bias levels separately. Measurement is

done via a multimeter at 2V DC (or 2000mV DC) setting. Insert black (-) probe into

black socket and red (+) probe into one of the green sockets. You should read a

value about 0.45V (450mV) for each tube. If the readings are different, then adjust

the bias level via potentiometers near the EL34 tubes. A small flat screwdriver will be

necessary to access internal bias pots.

ABSOLARE Push-Pull Amplifier User Manual 0.9