Absolare Push-Pull 사용자 설명서 - 페이지 11

{카테고리_이름} Absolare Push-Pull에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absolare Push-Pull 14 페이지.
Absolare Push-Pull에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

6.2.1. 845 Bias Levels

You have to adjust left and right 845 tube bias levels separately. Measurement is

done via a multimeter at 2V DC (or 2000mV DC) setting. Insert black (-) probe into

black socket and red (+) probe into one of the green sockets. You should read a

value about 0.45V (450mV) for each tube. If the readings are different, then adjust

the bias level via potentiometers near the EL34 tubes. A small flat screwdriver will be

necessary to access internal bias pots.

ABSOLARE Push-Pull Amplifier User Manual 0.9