Anntlent AN-USF5-01 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang Anntlent AN-USF5-01. Anntlent AN-USF5-01 15 halaman. Cell phone signal booster

（3）Booster Installation

Do not place the equipment in direct sunlight or in an area that has abrupt



temperature and humidity changes .

it is suggested that the booster is installed in a cool，dry and ventilated room without



erosive gas and smoke.

Connect power adaptor to the booster， connect The other end of power adaptor to the



power outlet.

WARNING:

The input voltage for the booster is 5~12V DC.

power supply that NOT 5~12V DC . otherwise, it will be damaged and the user may also

be injured.

APP OPERATION

1.Install APP software on your phone.

2. Run the Bluetooth app. Before running the app, first turn on the Bluetooth function on

the terminal device. The app has three main functions: "My Device", "Source Direction",

and "Video Teaching".

3.Add device: After clicking on "Scan Bluetooth devices", the app will find a device and

click "Connect" to add the device to the app. When configuring the device during the

process of adding it, name the device, such as "aa", and confirm to display the successful

addition; The device icon will appear in 'My Device'.

4.Equipment operation:

Click the device icon to enter the device description interface, as shown in Figure 1, which

describes the basic information of the device; Each disc in the figure represents a

frequency band. The figure shows how many frequency bands the device supports, the

number of each frequency band and the output power (indicated by the intermediate data

and the disc ring progress bar).

DO NOT use this Booster with a regular

9 / 14