Anntlent AN-USF5-01 Kullanıcı Kılavuzu - Sayfa 9
Genişletici Anntlent AN-USF5-01 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Anntlent AN-USF5-01 15 sayfaları. Cell phone signal booster
Sayfayı Yazdır（3）Booster Installation
Do not place the equipment in direct sunlight or in an area that has abrupt
temperature and humidity changes .
it is suggested that the booster is installed in a cool，dry and ventilated room without
erosive gas and smoke.
Connect power adaptor to the booster， connect The other end of power adaptor to the
power outlet.
WARNING:
The input voltage for the booster is 5~12V DC.
power supply that NOT 5~12V DC . otherwise, it will be damaged and the user may also
be injured.
APP OPERATION
1.Install APP software on your phone.
2. Run the Bluetooth app. Before running the app, first turn on the Bluetooth function on
the terminal device. The app has three main functions: "My Device", "Source Direction",
and "Video Teaching".
3.Add device: After clicking on "Scan Bluetooth devices", the app will find a device and
click "Connect" to add the device to the app. When configuring the device during the
process of adding it, name the device, such as "aa", and confirm to display the successful
addition; The device icon will appear in 'My Device'.
4.Equipment operation:
Click the device icon to enter the device description interface, as shown in Figure 1, which
describes the basic information of the device; Each disc in the figure represents a
frequency band. The figure shows how many frequency bands the device supports, the
number of each frequency band and the output power (indicated by the intermediate data
and the disc ring progress bar).
DO NOT use this Booster with a regular
9 / 14