Anritsu Company ShockLine MS46122B Series Panduan Memulai Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Alat Ukur Anritsu Company ShockLine MS46122B Series. Anritsu Company ShockLine MS46122B Series 20 halaman. Vector network analyzers verification kits and performance verification software
Halaman Cetak
Calibration/Verification Kit Components
Summary of Required Hardware
The table below summarizes the required support hardware for each verification kit. Only one calibration kit,
automatic or manual, is required. Note also that the PC Controller and the connecting GPIB cable are required
for all VNAs and all verification kits.
Table QSG-1.Summary of Required Hardware
Ver Kit
VNAs
Adapters
• Test Port 1 K (m)
3668-3 K
• 33KFKF50B K (f) to K (f) Adapter on
Connector
Port 1
Verification
Kit
• Test Port 2 K (m)
MS46524B-020
• Through Line Cable on Port 2
MS46522B-020
• 33KKF50B K (m) to K (f) on cable
MS46322B-020
above
MS46322B-040
MS46122B-020
MS46122B-040
Two
Adapters
• Test Port 1 K (m)
3663-3
• Test Port Cable on Port 2
Type N
• 71693-R K (f) to N (f) Adapter on
Connector
cable above
Verification
Kit
MS46524B-010
• Test Port 2 K (m)
MS46522B-010
• Test Port Cable on Port 2
MS46322B-010
• 71693-R K (f) to N (f) Adapter on
MS46122B-010
cable above
• 33NN50B N (m) to N (m) Adapter on
Three Adapters
adapter above
3-2300-610 Verification Kits/PVS QSG
VNA Test Port
Required
Adapter and/or
Through Line
PN: 10410-00766 Rev. B
2. Verification Kit Components
Compatible
Manual
Calibration
Kits
TOSLKF50A-40 – K(f)
TOSL CAL 40 GHz
TOSLK50A-40 – K(m)
TOSL CAL 40 GHz
TOSLNF50A-18 N(f)
TOSL CAL 18 GHz
TOSLN50A-18 N(m)
TOSL CAL 18 GHz
Recommended
Test Port Cables
3670K50-2
Test Port Cable Ruggedized
Semi-Rigid
61 cm (24") – K (f) to K (m)
3671KFK50-100
Test Port Cable Flexible
Phase Stable
100 cm (39.4")- K (f) to K (m)
3671KFK50-60
Test Port Cable Flexible
Phase Stable
60 cm (23.6") - K (f) to K (m)
3671KFK50-60
Test Port Cable Flexible
Phase Stable
60 cm (23.6") - K (f) to K (m)
QSG-3