Anritsu Company ShockLine MS46122B Series Panduan Memulai Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Alat Ukur Anritsu Company ShockLine MS46122B Series. Anritsu Company ShockLine MS46122B Series 20 halaman. Vector network analyzers verification kits and performance verification software
Halaman Cetak
3. Required PC Controller Equipment
3.
Required PC Controller Equipment
The following Personal Computer (PC) Controller equipment and software are required to control the
ShockLine Series VNA. The PC Controller and the VNA are connected over an Ethernet network. The required
Ethernet cable, test port adapters, and phase-stable through line with any required adapters are not included
in the verification kit.
The PVS must be run on a PC controller equipped as described in
Run-Time Engine 4.1 or later. The NI-VISA Run-Time license is available from National Instruments (NI) as a
stand-alone software package. Please contact NI for additional details.
Table 1. Required PC Controller Equipment
Component
PC Controller
National Instruments
QSG-4
Description
Personal computer with:
• Microsoft Windows XP SP3, or Microsoft Windows 7
• Minimum 233 MHz single or dual processor (recommended: Intel Pentium/Celeron
processor or AMD K6/Athlon-/Duron processor)
• 1 GB RAM
• USB 2.0 Type A Ports
• 20 MB of free hard disk space
• Mouse
• Keyboard
• Monitor with minimum display resolution of 1024 x 786
The following software is required from NI:
• NI-VISA 4.1 or higher
PN: 10410-00766 Rev. B
Table
1, with NI-VISA library and NI-VISA
3-2300-610 Verification Kits/PVS QSG