DAITEM SH401AX Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Keamanan DAITEM SH401AX. DAITEM SH401AX 9 halaman. Indoor siren

5.3 Fixing the siren in place

1. Remove the tamper mechanism washer

located on the back of the siren.

3. Open the siren at an angle of 45° (A) in

relation to the base and insert the pivots on

the base into the hinges.

(A) 45°

6. Performing a real test

Testing triggering when there is an attempt to remove the siren

IMPORTANT: the sounding level of the siren can cause

hearing disorders. The necessary precautions must therefore

be taken before testing siren triggering.

2. • For the siren to be installed there must be a space of 6 cm to the

left of the base, 4 cm above and 18 cm below. This clearance

allows for the siren to be easily opened or locked.

2. • Fix the siren at 3 points.

Detachable

tamper

mechanism

washer

Detachable tamper

mechanism washer

4. Close the siren and lock it using the screw located inside the

product.

45°

Insert adjustable fixing washers here

Pozidriv 2

6 cm

mur

Tamper hole with washer (A)

Bottom view of siren

Siren locking

1. Loosen the siren locking screw.

2. Open the siren.

3. Check triggering:

- of the siren,

- of the control panel,

- of the telephone dialler.

4. Issue an Off order.

4 cm

18 cm

Siren opening