DAITEM SH401AX Manuale di installazione - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione per Sistema di sicurezza DAITEM SH401AX. DAITEM SH401AX 9. Indoor siren
5.3 Fixing the siren in place
1. Remove the tamper mechanism washer
located on the back of the siren.
3. Open the siren at an angle of 45° (A) in
relation to the base and insert the pivots on
the base into the hinges.
(A) 45°
6. Performing a real test
Testing triggering when there is an attempt to remove the siren
IMPORTANT: the sounding level of the siren can cause
hearing disorders. The necessary precautions must therefore
be taken before testing siren triggering.
2. • For the siren to be installed there must be a space of 6 cm to the
left of the base, 4 cm above and 18 cm below. This clearance
allows for the siren to be easily opened or locked.
2. • Fix the siren at 3 points.
Detachable
tamper
mechanism
washer
Detachable tamper
mechanism washer
4. Close the siren and lock it using the screw located inside the
product.
A
45°
6
Insert adjustable fixing washers here
Pozidriv 2
Pozidriv 2
6 cm
mur
Tamper hole with washer (A)
Bottom view of siren
Siren locking
1. Loosen the siren locking screw.
2. Open the siren.
3. Check triggering:
- of the siren,
- of the control panel,
- of the telephone dialler.
4. Issue an Off order.
4 cm
18 cm
Siren opening