ansio 1321 Petunjuk dan Manual Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Petunjuk dan Manual Pengoperasian untuk Pemanas ansio 1321. ansio 1321 13 halaman. Oil filled radiator heater

Start Timer

When the heater is in the Stand-by mode, press the Timer button

the control panel or on the remote to set the desired number of hours after

which you want the heater to be started. You can set a value between 1-

24 hours by pressing the

decrease the timer by 1 hour respectively. To cancel the Timer, press the

power button

decrements of hours.

NOTE:

• You can check the timer duration anytime by pressing the Timer button

The timer will only display the time in hours and not minutes.

• The memory function will not retain the last used timer settings.

CHILD LOCK SETTING

To turn the child lock setting ON, Press the MODE

button and the Timer button

seconds. The child lock setting will turn ON and a

lock symbol

NOTE:

• When the heater is turned OFF or after a power

failure, the child lock setting will be turned OFF.

• Child Lock cannot be activated using the

Remote.

When the heater is turned OFF and turned back ON again, the heater will

retain the last used settings.

NOTE:

• When you turn the heater ON for the first time, the heater will start with

a high-power mode at 35˚C automatically.

• The Memory function does not retain the last used Timer setting if the

heater is turned OFF and turned back ON.

To turn the heater OFF, press the power button

black switch found at the side of the heater OFF and pull out the plug from

the mains.

ANSIO 1321 (M20v01)

twice. The timer can only be operated in increments or

will be displayed.

and

button

together for a few

increase

to switch OFF. Turn the

and