ansio 1321 Инструкции и руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Инструкции и руководство по эксплуатации для Нагреватель ansio 1321. ansio 1321 13 страниц. Oil filled radiator heater
Печатать страницу
Start Timer
When the heater is in the Stand-by mode, press the Timer button
the control panel or on the remote to set the desired number of hours after
which you want the heater to be started. You can set a value between 1-
24 hours by pressing the
decrease the timer by 1 hour respectively. To cancel the Timer, press the
power button
decrements of hours.
NOTE:
• You can check the timer duration anytime by pressing the Timer button
The timer will only display the time in hours and not minutes.
• The memory function will not retain the last used timer settings.
CHILD LOCK SETTING
To turn the child lock setting ON, Press the MODE
button and the Timer button
seconds. The child lock setting will turn ON and a
lock symbol
NOTE:
• When the heater is turned OFF or after a power
failure, the child lock setting will be turned OFF.
• Child Lock cannot be activated using the
Remote.
MEMORY FUNCTION
When the heater is turned OFF and turned back ON again, the heater will
retain the last used settings.
NOTE:
• When you turn the heater ON for the first time, the heater will start with
a high-power mode at 35˚C automatically.
• The Memory function does not retain the last used Timer setting if the
heater is turned OFF and turned back ON.
TURNING THE HEATER OFF
To turn the heater OFF, press the power button
black switch found at the side of the heater OFF and pull out the plug from
the mains.
ANSIO 1321 (M20v01)
twice. The timer can only be operated in increments or
will be displayed.
and
button
together for a few
to
increase
to switch OFF. Turn the
on
and
8