24PetWatch Microchip Reader Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembaca Kartu 24PetWatch Microchip Reader. 24PetWatch Microchip Reader 13 halaman.

Important information

PLEASE READ THE FOLLOWING INFORMATION CAREFULLY AND RETAIN
THIS MANUAL FOR FUTURE REFERENCE.
You can find the serial number in the battery compartment.
Please make sure you have all the components listed on page 1.
Only use the USB cable provided for software updates. Do not attempt to use it
to power or charge the reader.
Do not insert any foreign objects into the product.
This product is not waterproof.
The reader requires 2 x alkaline AA batteries, which should be inserted
and replaced with caution. Do not mix different types of batteries or new
and used batteries. If the unit is going to be unused for a long period,
please remove the batteries.
Safety warnings
This product uses RFID and therefore may cause problems with sensitive
electronic medical devices such as pacemakers and monitors within a
3 foot (1 meter) radius.
Do not use this product if parts are missing, damaged or worn.
Keep small parts out of reach of children and animals.
Technical specifications
Size:
5 ³⁄ ⁸ '' (L) x 2 ⁷⁄ ¹⁶ '' (W) x 1¹⁄ ⁸ '' (H)
(136mm x 61mm x 31mm)
Battery life:
6 months +
(with good quality alkaline batteries)
Readable temperature range:
+91.4
F to +109
o
If the Microchip Temperature doesn't fall
within this range an out of range symbol
will be displayed, see page 6.
3
F (+33
C to +43
C)
o
o
o
Reading distance:
Up to 3 ¾'' (95mm) away from the
microchip, depending on microchip
type and orientation.
Storage temperature:
+14
F to +158
F (-10
o
o
Operating temperature:
+23
F to +131
F (-5
o
o
o
Operating frequency:
125 kHz & 134 kHz (RFID)
C to +70
C)
o
o
C to +55
C)
o