24PetWatch Microchip Reader Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembaca Kartu 24PetWatch Microchip Reader. 24PetWatch Microchip Reader 13 halaman.

Compatible microchips

This is a universal microchip reader which can read all of the following microchip types:

• FDX-A (FECAVA) microchips

• FDX-B ISO microchips

• Trovan microchips

What are temperature sensing microchips?

Temperature-sensing microchips are primarily identification microchips, compatible with

ISO 11784/11785 and universal readers. However, they also incorporate a temperature

biosensor, capable of measuring an animal's temperature at the implant site.

Temperature-sensing microchips are a non-invasive way of frequently measuring a pet's

temperature, without causing stress. Multiple measurements taken consecutively can

establish a trend of individual animal profile or average temperature and variability.

Atypical variations from this trend can be indicative of changes in an animal's well-being.

Microchip Temperature is not a replacement for rectal temperature, and should

not be interpreted as such. Microchip Temperature and rectal temperature, although

correlated, are not equivalent and should not be expected to show identical readings.

If an animal with a temperature-sensing microchip is

scanned with the 24PetWatch reader, their internal

Microchip Temperature will be visible on the LCD

screen alongside their microchip number. See page 6.

Batteries and power

Remove the battery cover by pressing the

arrow and sliding it away from the center.

To turn the reader on, simply press the button once. If the button is

pressed again it will activate a microchip scan. The reader will turn

itself off automatically after you've finished using it.

When the batteries begin to run low, this icon will appear on the LCD display.

Please change the batteries with 2 x high quality alkaline batteries.

• Avid Encrypted microchips

• Temperature-sensing microchips

from Allflex® or Destron Fearing™

Insert the batteries. Make sure the + and -

symbols are the correct way round.