DSC LE4000 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Ponsel DSC LE4000. DSC LE4000 8 halaman. Lte wireless alarm communicator

Halaman Cetak

1. Technical Specifications

Introduction

The LE4000 is a cellular communicator that sends alarm system information to a Sur-Gard System I-IP, II, III, IV or 5 receiver

through an LTE or 3G wireless network. This cellular communicator can be used with UL/ULC Listed compatible control units,

as indicated in the manufacturer's installation instructions.

The performance of the LE4000 depends greatly on cellular network coverage. Therefore, it should not be mounted without

first performing placement tests to determine the best location for reception (minimum of one blue/green LED ON). Optional

antenna kits – LTE- 8ANT (8ft/2.4m), LTE-15ANT (15ft/4.6m), LTE- 25ANT (25ft/7.6m) and LTE- 50ANT (50ft/15.2m) are avail-

able.

NOTE: The LE4000 is designed to work with the Contact ID communication format as described in the SIA DC-05 standard, as

well as the SIA communications format as described in the SIA DC-03 standard. Before completing the field installation of the

alarm monitoring system please ensure communication with the supervising central station is successful by sending several

events and getting confirmation that they have been received.

Features

Penta-Band LTE; Dual-band UMTS (BII/V) and LTE (B2/4/512/13)Radio

Advanced Carrier Selection

Cellular Signal Indicator

LTE /3G / Internet communication with Sur-Gard SG-System I-IP / II / III / IV / 5

Compatible with 4-digit or 10-digit Contact ID communication format as described in SIA DC-05 Standard and the SIA DC-

03 standard for 300 baud. Example of suitable compatible alarm panels:

DSC Models HS2128, HS2064, HS2032, HS2016, PC1864, PC1832, PC1616, PC4020.

Panel Transmission Monitoring for up to four phone numbers

Simulates landline

Switches automatically to the LTE or 3G network in the event of landline trouble (e.g., line down)

DLS support for status, firmware updates and remote debug enable

Remote Firmware Upgrade

Remote Diagnostics

Case and Wall Tamper

Panel Format Detection

2 Programmable Inputs

2 Programmable Outputs

Technical Specifications

The input voltage to the LE4000 can be drawn from the UL/ULC Listed control panel or provided by an external UL/ULC Listed

power supply (with battery back-up) rated for the application (external power-limited source).

Power Supply Rating

Input Voltage Class:

Compatible External Power Adapters (2-

prong):

Input Voltage/ Input Current (Nominal):

Average Current:

Peak Current (no battery):

Peak Current (with battery):

Battery:

Battery Charging Voltage (maximum):

Battery Charging Current:

Battery Standby Time:

Class 2, power limited

DSC ADP1310(W)-NAU (US) / ADP1310(W)-NA (Canada)

NOTE: For UL/ULC listed installations, the input rating for the external

power adapter is 120V

13.8V

/700mA (when supplied by compatible external power adapter)

9-14V

/500mA (use listed, compatible control panel or power supply)

40mA*

180mA*

350mA*

* Plus any curent draw from LE4000 + ve terminal

NiMH, rated 7.2V, 2.2Ah

9.1V

160mA

24 hours

NOTE: Battery must be replaced every 3-5 years.

/60Hz/0.4A.