DSC ELECTRONICS DF-C 63 Series Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Panel Kontrol DSC ELECTRONICS DF-C 63 Series. DSC ELECTRONICS DF-C 63 Series 11 halaman.

DF-C 63XXX & 61XXX Series User's Manual

Version 28.04.2019

B). Output with potential to input (potential to input PE)

Connections output

L (1, 2, 3): Phase

N: Neutral → Bridge to input N

GND: Do not connect

Connections input

L1: Input phase 1

L2: Input phase 2

L3: Input phase 3

N: Neutral conductor

PE: Earth conductor

5. Connection of the load

Depending on the model the output / input connections are located on the back, on the front or behind the service

door of the device. We recommend protecting the connectors from wear if the load will be frequently connected and

disconnected by connecting it not directly to the device, but to use an intermediate bridge. In this case, the

intermediate bridge can remain connected to the power supply - so the connection terminal of the power supply is

used less often.

DSC-Electronics Germany • Georgstraße 36 • 53111 Bonn