ATTACK PZO 120 Petunjuk Penggunaan Manual - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Pemanas Air ATTACK PZO 120. ATTACK PZO 120 12 halaman. Direct heated gas tanks for d.h.w

WARNING FOR USER!
 When taking the storage tank over make sure whether the letter of guarantee is confirmed
properly.
 Reclaim defects immediately otherwise you lose your right for guarantee. Check whether
the equipment was not damaged during transport and if it was, claim the guarantee at the
transporter.
 Reclamation of the completeness of the delivery is carried out in compliance with
Commercial Code and Civil Code at the deliverer.
 Assembly of the product can be done only by a qualified worker or organization with a valid
certificate. Repairs of the storage tanks can be performed only by service organizations
included in the list. Unqualified intervention into the storage tank can cause losing the right
for a guarantee repair free of charge!

INSTALLATION AND ADJUSTMENT OF GAS VALVE

Only for qualified workers!
Adjustment of the outlet pressure
All the adjustments must be done according to technical
parameters of the appliance. Inlet and outlet pressure are
checked by A and B outlets.
Maximum pressure: Set up the control button to maximum
level of 7, by C screw set up pressure of 10 mbar.
Setting up gas flow to ignition burner
By gradual screwing D screw the flow decreases, by
releasing it increases.
If you want to put gas flow adjustment to ignition burner out
of operation, screw the D screw up to stop.
WARNING:
After finishing all the activities it is necessary to check
tightness of gas fitting and verify whether the appliance is
working.
BOILER ACCESSORIES, DOCUMENTATION
 A part of the gas storage tank is a safety valve (0,6 mbar)
and draught breaker
 Instruction for use
Because of permanent development of products we reserve the right to change
technical data.
10
-
+
C
D
setting up
setting up
the outlet
the output
of main burner
of pilot-burner
A
measuring
outlet gas
pressure
B
measuring
inlet gas
pressure
-
+