DT Research DT398B Panduan Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Terminal sentuh DT Research DT398B. DT Research DT398B 4 halaman. Mobile pos tablet
Juga untuk DT Research DT398B: Panduan Pengoperasian Dasar (4 halaman)

Halaman Cetak
DT398C/ DT398B
The DT398C/ DT398B
A
B
C
Input/ Output Ports
e-SATA USB Hybrid Port
A
B
Headphone Jack
C
DC Power Input
Full Slot Smart Card Reader
D
SD Slot
E
Button Functions
BUTTON
ACTION
Power on,
Push/release typically enters Standby mode, or Push/release exits Standby mode or
1
restarts (software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
Programmable,
2
As scanner trigger when equipped with the scanner module
3
4 5
Programmable
Wireless switch
6
2
ENGLISH
D
Wireless LED
Battery/Power LED
E
Power/Battery LED Status:
•
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking orange indicates that the battery is below 10%
•
Blinking blue and orange alternately indicates the battery is being warmed up. Do not
1
unplug the AC/DC adapter.
2
3
Precautions
4
•
Always exercise care when operating and handling the
5
•
Do NOT apply excessive pressure to the display screen.
6
•
We recommend using the Stylus provided to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
possible, the DT398C/ DT398B should face away from direct light to reduce glare.
•
If the AC-DC power adapter is used to recharge or power the
AC-DC adapter other than the one provided with the tablet or acquired from the
manufacturer or its partners.
•
In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power off the DT398C/ DT398B and disconnect all power sources. Report
the problem to your device provider immediately.
•
Never attempt to disassemble the
Basic Features
The DT398C/ DT398B wireless tablet integrates a bright and responsive touch display, 1
USB port, and embedded networking elements such as wireless LAN or optional 3G. The
DT398C/ DT398B is complemented by a suite of accessories, including battery expansion,
docking cradles, and wall/ vehicle mount cradles, for a comprehensive user experience.
A DT398C/ DT398B typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter
that may connect to other wireless devices or access points. If your DT398C/ DT398B
does not come with such a network adapter, please consult your device provider to
establish the desired network connectivity.
DT398C/ DT398B.
tablet, do NOT use any
DT398C/ DT398B, as this will void the warranty.
3
ENGLISH