DT Research DT398B Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Terminal sentuh DT Research DT398B. DT Research DT398B 4 halaman. Mobile pos tablet
Juga untuk DT Research DT398B: Panduan Pengoperasian Dasar (4 halaman)

Halaman Cetak

DT398C/ DT398B

Button Management

Where supported by software, many of the hard buttons on the DT398C/ DT398B

are programmable to perform a function of the user's choice. To activate the button

re-assignment application, invoke the Button Manager application

Brightness Control

To control the screen brightness, launch the Windows Mobility Center. Users can

increase or decrease the brightness level of the LCD panel by moving the slider to adjust

the brightness of your display.

Battery and Power Management

The DT398C/ DT398B is equipped with an internal Li-Ion battery pack and an optional

external battery pack that clips (hot-pluggable) onto the back of the tablet. The period

between battery recharges can be signiﬁcantly lengthened by putting the tablet into

Standby mode through the Power Button (see Buttons Function Table) whenever the

tablet is not in use. Depending on the operating software, the DT398C/ DT398B may also

be conﬁgured to enter various power-saving modes via the Power Button or through

timed entry.

ENGLISH

USING THE DT398C/ DT398B

Peripherals Support

Through its USB port, the DT398C/ DT398B supports a wide range of USB-based

peripherals. These peripherals are applicable for software installation, applications

storage, data storage, docking or software recovery and update.

The DT398C/ DT398B is complemented by an optional Desktop Cradle or Wall/ Vehicle

Mount Cradle for support, pass-through charging, and connection to a range of USB

peripherals, including keyboard and mouse. The Cradles oﬀer the following interfaces: a

DC-in port for the AC-DC adapter, an Ethernet port, a VGA output and USB ports. Always

seat the DT398C/ DT398B securely onto the cradle. The cradle must be powered by the

AC-DC adapter for the Ethernet and USB ports to function. The battery packs on the

DT398C/ DT398B may be recharged by connecting the AC-DC adapter directly to the

DC-in port on the DT398C/ DT398B or through the DC-in port on the Cradle while the

DT398C/ DT398B is docked.

Remote Management

Depending on software conﬁguration, the DT398C/ DT398B can be centrally managed

for asset monitoring and for software control. Please consult your device provider.

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT Research

website.

If the DT398C/ DT398B comes with a 3G module, please contact your product and/or

service provider for the SIM Card installation procedures.

ENGLISH