ATV NVR Instalasi dan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Instalasi dan Pengoperasian untuk Perangkat Keras Jaringan ATV NVR. ATV NVR 5 halaman.

Halaman Cetak

NVR Quick Setup Guide

>INSTALLATION AND OPERATION (2)

>INSTALLATION AND OPERATION (3)

Quick search: To search quickly for cameras the user must enter

the camera ID and Password.

Recording Schedule Setup

Detail search: In this case the system will automatically check

for all camera ID's and passwords and will generally take

longer than "Quick Search".

This menu allows you to create your own recording schedule and

trigger type. To enable this feature, the schedule recording feature at

RECORD->POLICY->SCHEDULE menu must be turned "ON".

Manual add: To manually add an ONVIF compliant camera

Using direction keys and ENTER button, choose preferred record

the user must enter the full IP address.

types (such as Continuous, Event, Both (Cont&Evnt) on the selected

Ex. "http://xxx.xxx.xx.xx/onvif/device_service".

time and date. Different color will represent different recording types.

In this case, the IP camera must support Onvif.

IP Camera Setup

CH : 1 ~ 4 (or 16): Select channel for schedule recording.

SELECT DAY [SUN – SAT, Hol]

The user can set up the IP camera details: Profile, Resolution,

TIME: Move the cursor to desired time and press ENTER

FPS, Quality, GOP, Motion, Sensor and Audio.

key to set it highlighted. Press click again to change schedule

For motion detection and event recording function, the user

recording option by color.

select the Motion as ON position.

You can set different recording schedule and type for each camera

(channel) or you can apply current schedule setting to all other

cameras by pressing "Apply to All CH" button. Apply To All Channel:

If selected, "Apply to All CH" window will appear. Press OK to apply

the setup to all channels. When the recording schedule setup is

done, click OK.

Motion / Event Recording Setup

For motion / event recording function, the user selects the Motion

as ON position in the IP Camera Setup menu and set the channel

(camera) as Event recording in the Record > Schedule menu.

Then the icons (motion and event icon) will be appeared on the

live screen as below.

Record Quality Setup

The user must set the recording quality for each camera for both

Normal and Event conditions. The user can set the "Secondary"

Stream for the normal condition and the "Primary" Stream for the

event condition. This function allows the user to save the HDD

recording size. If you click the Setup Tab, the IP Camera Setup

window will be appeared.

* The NVR will set the motion area in the full screen. If the user

wants to set the motion only for the specific area, the user should

set up the motion manually by accessing to the IP camera web.