ページを印刷するNVR Quick Setup Guide
NVR Quick Setup Guide
>INSTALLATION AND OPERATION (2)
>INSTALLATION AND OPERATION (3)
Quick search: To search quickly for cameras the user must enter
the camera ID and Password.
Recording Schedule Setup
Detail search: In this case the system will automatically check
for all camera ID's and passwords and will generally take
longer than "Quick Search".
This menu allows you to create your own recording schedule and
trigger type. To enable this feature, the schedule recording feature at
RECORD->POLICY->SCHEDULE menu must be turned "ON".
Manual add: To manually add an ONVIF compliant camera
Using direction keys and ENTER button, choose preferred record
the user must enter the full IP address.
types (such as Continuous, Event, Both (Cont&Evnt) on the selected
Ex. "http://xxx.xxx.xx.xx/onvif/device_service".
time and date. Different color will represent different recording types.
In this case, the IP camera must support Onvif.
IP Camera Setup
1)
CH : 1 ~ 4 (or 16): Select channel for schedule recording.
2)
SELECT DAY [SUN – SAT, Hol]
The user can set up the IP camera details: Profile, Resolution,
3)
TIME: Move the cursor to desired time and press ENTER
FPS, Quality, GOP, Motion, Sensor and Audio.
key to set it highlighted. Press click again to change schedule
For motion detection and event recording function, the user
recording option by color.
select the Motion as ON position.
You can set different recording schedule and type for each camera
(channel) or you can apply current schedule setting to all other
cameras by pressing "Apply to All CH" button. Apply To All Channel:
If selected, "Apply to All CH" window will appear. Press OK to apply
the setup to all channels. When the recording schedule setup is
done, click OK.
Motion / Event Recording Setup
For motion / event recording function, the user selects the Motion
as ON position in the IP Camera Setup menu and set the channel
(camera) as Event recording in the Record > Schedule menu.
Then the icons (motion and event icon) will be appeared on the
live screen as below.
Record Quality Setup
The user must set the recording quality for each camera for both
Normal and Event conditions. The user can set the "Secondary"
Stream for the normal condition and the "Primary" Stream for the
event condition. This function allows the user to save the HDD
recording size. If you click the Setup Tab, the IP Camera Setup
window will be appeared.
* The NVR will set the motion area in the full screen. If the user
wants to set the motion only for the specific area, the user should
set up the motion manually by accessing to the IP camera web.