AirTrack Factory AirBoard Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori AirTrack Factory AirBoard. AirTrack Factory AirBoard 7 halaman.
Juga untuk AirTrack Factory AirBoard: Panduan Pengguna (12 halaman)
Halaman Cetak
H E L P !
Does you AirProduct seem to be leaking?
Make sure all valves are closed properly. The pin inside the grey valve are often left open (pin in)
when the cap is closed, which means the valve will still be leaking air. Always make sure the valve is
closed (pin out) before closing the valve. Still leaking? Check our FAQ.
Can't fit the product in the bag?
When rolling up the AirBeam, make sure that the center line is facing down!
We recommend using the blower to get the last bits of air out of the AirProduct. Our blowers have
an input and an output vent. One for inflating and one for deflating. For deflating, connect the
blowers' adapter to the input (IN) side of the blower and deflate untill the AirProduct is completely
flat.
When I detach the blower from the AirProduct all the air goes out.
Make sure the pin inside the valve is closed (pin out) before attaching the blower. The pin should
remain closed (pin out) during inflation and usage. Only open the valve (pin in) when adjusting
pressure or deflating.
10
F . A . Q .
How long does it take to inflate an AirProduct?
With the foot pump AirProducts can be inflated within minutes. Using our OV10 blowers greatly
speeds up the inflation process.
Is there a chance of damaging an AirProduct by over pressurizing it?
No, the extreme pressure needed to actually damaging an AirProduct can not be reached with the
blowers we supply. Do not use any blowers or compressors not supplied by AirTrack Factory or one
of its distributors to inflate the AirProduct.
24 Hours after inflation the airtrack is soft.
AirTracks are not designed to maintain their pressure overnight. Differences in temperatures
and weather influence the pressure inside the AirProduct. Make sure to set the pressure to your
preferences before each training. If you have any doubts, feel free to contact us for a professional
opinion.
What is the lifespan or your products?
Obviously this will depend on how the products are used and in what frequency. A lifespan of more
than 7 years is definitely not uncommon.
What guarantees do you give on your products?
We give 2 years guarantee on our products. The customer is responsible for delivery to, and pickup
from, AirTrack Factory. Please check our terms of delivery for more detailed info.
When our AirProduct is leaking, how can you help us?
First of all, check if all valves are properly closed. If a valve is leaking, please contact us.
A puncture in the surface or damage to a seam could cause your AirProduct to leak.
For both options we have a solution that is both simple and cheap. You do not have to send the
equipment back to us; we will send the repair material to you or assist you in purchasing it locally.
Repairs take no longer than 10 minutes.
www.airtrackfactory.com - [email protected] - Tel. +31 (0)24 89 09 659
11