Comtrol RocketLinx ES7510 Panduan Instalasi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Beralih Comtrol RocketLinx ES7510. Comtrol RocketLinx ES7510 8 halaman. Industrial 10-port gigabit managed poe plus switch

Halaman Cetak

Introduction

The RocketLinx ES7510 is ten port PoE managed switch that provides:

Eight 10/100BASE-TX PoE ports that are IEEE 802.3af (15.4W) and 802.3at (30W)

compliant with a forced powering feature to support non-standard Power Devices (PDs)

Two Gigabit (10/100/1000BASE-TX) uplink ports

The RocketLinx ES7510 provides features needed for network control and security in an

industrial network environment. See the Comtrol web site for detailed product specifications.

Installation Overview

You can use the following overview to install the RocketLinx ES7510. If you need more

detailed information, you can refer to the RocketLinx ES7510 User Guide, which contains

detailed installation and configuration information.

Connect the Power

The RocketLinx ES7510 provides redundant power inputs (PWR 1/2).

1. Insert positive and negative wires (12-24AWG) into V+ and V- contacts.

Note: Power should be disconnected from the power supply before connecting it to the

switch. Otherwise, your screwdriver blade can inadvertently short your terminal

connections to the grounded enclosure.

2. Tighten the wire-clamp screws to prevent the wires

from coming loose.

 PWR1 and PWR2 support power

redundancy and reverse polarity protection.

 If both power inputs are connected, the

RocketLinx ES7510 is powered from the highest

connected voltage.