Comtrol RocketLinx ES7510 Panduan Instalasi Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Beralih Comtrol RocketLinx ES7510. Comtrol RocketLinx ES7510 8 halaman. Industrial 10-port gigabit managed poe plus switch

Halaman Cetak
Mount the ES7510
You can use the following procedure to mount the RocketLinx ES7510 on the wall.
Attach the mounting brackets to the RocketLinx ES7510 by using the screws provided in the
bracket mounting kit.
To avoid damage to the RocketLinx ES7510 circuitry, make sure that you use the screws
included in the bracket mounting package to attach and tighten the brackets onto the
RocketLinx ES7510. The screws are M3 screws and are 6 mm in length.
The RocketLinx ES7510 will disperse heat through the metal case during PoE port operation.
The RocketLinx ES7510 should be installed and mounted onto a panel that provides good heat
dispersion.
Connect the Ethernet Ports
You can use the following information to connect standard Ethernet cables between the
RocketLinx ES7510 10/100BASE-TX Ethernet ports and the network nodes. The Fast Ethernet
ports support 10BASE-T and 100BASE-TX, full- or half-duplex modes.
The gigabit Ethernet ports support 10BASE-T,
100BASE-TX, and 1000BASE-TX. Ports 1-8 are
Fast Ethernet 10/100BASE-TX PoE ports that are
IEEE802.3af (PoE) and IEEE802.3at (PoE Plus)
compliant. The following table shows the RJ45
PoE pin-out assignments.
1
2
3
4, 5
6
7, 8
10/100BASE-TX PoE
RX + and Vport -
RX - and Vport -
TX + and Vport +
NC
TX - and Vport +
NC
1000BASE-TX
1
BI_DA+
2
BI_DA-
3
BI_DB+
4
BI_DC+
5
BI_DC-
6
BI_DB-
7
BI_DD+
8
BI_DD-
3
Description
Bi-directional pair A +
Bi-directional pair A -
Bi-directional pair B +
Bi-directional pair C +
Bi-directional pair C -
Bi-directional pair B -
Bi-directional pair D +
Bi-directional pair D -